# Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # TODO: define logic functions of a tensor import paddle from ..base.data_feeder import check_type, check_variable_and_dtype from ..common_ops_import import Variable from .layer_function_generator import templatedoc Tensor = paddle.base.framework.core.eager.Tensor from paddle import _C_ops from paddle.tensor.creation import full from paddle.tensor.math import broadcast_shape from paddle.utils.inplace_utils import inplace_apis_in_dygraph_only from ..framework import LayerHelper, in_dynamic_mode, in_dynamic_or_pir_mode __all__ = [] def _logical_op(op_name, x, y, out=None, name=None, binary_op=True): if in_dynamic_mode(): op = getattr(_C_ops, op_name) if binary_op: return op(x, y) else: return op(x) else: check_variable_and_dtype( x, "x", [ "bool", "int8", "int16", "int32", "int64", "float16", "float32", "float64", "uint16", "complex64", "complex128", ], op_name, ) if y is not None: check_variable_and_dtype( y, "y", [ "bool", "int8", "int16", "int32", "int64", "float16", "float32", "float64", "uint16", "complex64", "complex128", ], op_name, ) if out is not None: check_type(out, "out", Variable, op_name) helper = LayerHelper(op_name, **locals()) if binary_op and x.dtype != y.dtype: raise ValueError( f"(InvalidArgument) The DataType of {op_name} Op's Variable must be consistent, but received {x.dtype} and {y.dtype}." ) if out is None: out = helper.create_variable_for_type_inference(dtype=x.dtype) if binary_op: helper.append_op( type=op_name, inputs={"X": x, "Y": y}, outputs={"Out": out} ) else: helper.append_op( type=op_name, inputs={"X": x}, outputs={"Out": out} ) return out def logical_and(x, y, out=None, name=None): r""" Compute element-wise logical AND on ``x`` and ``y``, and return ``out``. ``out`` is N-dim boolean ``Tensor``. Each element of ``out`` is calculated by .. math:: out = x \&\& y Note: ``paddle.logical_and`` supports broadcasting. If you want know more about broadcasting, please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): the input tensor, it's data type should be one of bool, int8, int16, in32, in64, float16, float32, float64, complex64, complex128. y (Tensor): the input tensor, it's data type should be one of bool, int8, int16, in32, in64, float16, float32, float64, complex64, complex128. out(Tensor, optional): The ``Tensor`` that specifies the output of the operator, which can be any ``Tensor`` that has been created in the program. The default value is None, and a new ``Tensor`` will be created to save the output. name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: N-D Tensor. A location into which the result is stored. It's dimension equals with ``x``. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([True]) >>> y = paddle.to_tensor([True, False, True, False]) >>> res = paddle.logical_and(x, y) >>> print(res) Tensor(shape=[4], dtype=bool, place=Place(cpu), stop_gradient=True, [True , False, True , False]) """ if in_dynamic_or_pir_mode(): return _C_ops.logical_and(x, y) return _logical_op( op_name="logical_and", x=x, y=y, name=name, out=out, binary_op=True ) @inplace_apis_in_dygraph_only def logical_and_(x, y, name=None): r""" Inplace version of ``logical_and`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_logical_and`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.logical_and_(x, y) def logical_or(x, y, out=None, name=None): """ ``logical_or`` operator computes element-wise logical OR on ``x`` and ``y``, and returns ``out``. ``out`` is N-dim boolean ``Tensor``. Each element of ``out`` is calculated by .. math:: out = x || y Note: ``paddle.logical_or`` supports broadcasting. If you want know more about broadcasting, please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): the input tensor, it's data type should be one of bool, int8, int16, in32, in64, float16, float32, float64, complex64, complex128. y (Tensor): the input tensor, it's data type should be one of bool, int8, int16, in32, in64, float16, float32, float64, complex64, complex128. out(Tensor): The ``Variable`` that specifies the output of the operator, which can be any ``Tensor`` that has been created in the program. The default value is None, and a new ``Tensor`` will be created to save the output. name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: N-D Tensor. A location into which the result is stored. It's dimension equals with ``x``. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([True, False], dtype="bool").reshape([2, 1]) >>> y = paddle.to_tensor([True, False, True, False], dtype="bool").reshape([2, 2]) >>> res = paddle.logical_or(x, y) >>> print(res) Tensor(shape=[2, 2], dtype=bool, place=Place(cpu), stop_gradient=True, [[True , True ], [True , False]]) """ if in_dynamic_or_pir_mode(): return _C_ops.logical_or(x, y) return _logical_op( op_name="logical_or", x=x, y=y, name=name, out=out, binary_op=True ) @inplace_apis_in_dygraph_only def logical_or_(x, y, name=None): r""" Inplace version of ``logical_or`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_logical_or`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.logical_or_(x, y) def logical_xor(x, y, out=None, name=None): r""" ``logical_xor`` operator computes element-wise logical XOR on ``x`` and ``y``, and returns ``out``. ``out`` is N-dim boolean ``Tensor``. Each element of ``out`` is calculated by .. math:: out = (x || y) \&\& !(x \&\& y) Note: ``paddle.logical_xor`` supports broadcasting. If you want know more about broadcasting, please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): the input tensor, it's data type should be one of bool, int8, int16, int32, int64, float16, float32, float64, complex64, complex128. y (Tensor): the input tensor, it's data type should be one of bool, int8, int16, int32, int64, float16, float32, float64, complex64, complex128. out(Tensor): The ``Tensor`` that specifies the output of the operator, which can be any ``Tensor`` that has been created in the program. The default value is None, and a new ``Tensor`` will be created to save the output. name (str, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Returns: N-D Tensor. A location into which the result is stored. It's dimension equals with ``x``. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([True, False], dtype="bool").reshape([2, 1]) >>> y = paddle.to_tensor([True, False, True, False], dtype="bool").reshape([2, 2]) >>> res = paddle.logical_xor(x, y) >>> print(res) Tensor(shape=[2, 2], dtype=bool, place=Place(cpu), stop_gradient=True, [[False, True ], [True , False]]) """ if in_dynamic_or_pir_mode(): return _C_ops.logical_xor(x, y) return _logical_op( op_name="logical_xor", x=x, y=y, name=name, out=out, binary_op=True ) @inplace_apis_in_dygraph_only def logical_xor_(x, y, name=None): r""" Inplace version of ``logical_xor`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_logical_xor`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.logical_xor_(x, y) def logical_not(x, out=None, name=None): """ ``logical_not`` operator computes element-wise logical NOT on ``x``, and returns ``out``. ``out`` is N-dim boolean ``Variable``. Each element of ``out`` is calculated by .. math:: out = !x Note: ``paddle.logical_not`` supports broadcasting. If you want know more about broadcasting, please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x(Tensor): Operand of logical_not operator. Must be a Tensor of type bool, int8, int16, in32, in64, float16, float32, or float64, complex64, complex128. out(Tensor): The ``Tensor`` that specifies the output of the operator, which can be any ``Tensor`` that has been created in the program. The default value is None, and a new ``Tensor` will be created to save the output. name(str|None): The default value is None. Normally there is no need for users to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: N-D Tensor. A location into which the result is stored. It's dimension equals with ``x``. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([True, False, True, False]) >>> res = paddle.logical_not(x) >>> print(res) Tensor(shape=[4], dtype=bool, place=Place(cpu), stop_gradient=True, [False, True , False, True ]) """ if in_dynamic_or_pir_mode(): return _C_ops.logical_not(x) return _logical_op( op_name="logical_not", x=x, y=None, name=name, out=out, binary_op=False ) @inplace_apis_in_dygraph_only def logical_not_(x, name=None): r""" Inplace version of ``logical_not`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_logical_not`. """ if in_dynamic_mode(): return _C_ops.logical_not_(x) def is_empty(x, name=None): """ Test whether a Tensor is empty. Args: x (Tensor): The Tensor to be tested. name (str, optional): The default value is ``None`` . Normally users don't have to set this parameter. For more information, please refer to :ref:`api_guide_Name` . Returns: Tensor: A bool scalar Tensor. True if 'x' is an empty Tensor. Examples: .. code-block:: python >>> import paddle >>> input = paddle.rand(shape=[4, 32, 32], dtype='float32') >>> res = paddle.is_empty(x=input) >>> print(res) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, False) """ if in_dynamic_or_pir_mode(): return _C_ops.is_empty(x) else: check_variable_and_dtype( x, 'x', ['float32', 'float64', 'int32', 'int64'], 'is_empty' ) check_type(name, "name", (str, type(None)), "is_empty") helper = LayerHelper("is_empty", **locals()) cond = helper.create_variable_for_type_inference(dtype='bool') cond.stop_gradient = True helper.append_op( type='is_empty', inputs={'X': [x]}, outputs={'Out': [cond]} ) return cond def equal_all(x, y, name=None): """ Returns the truth value of :math:`x == y`. True if two inputs have the same elements, False otherwise. Note: The output has no gradient. Args: x(Tensor): Tensor, data type is bool, float32, float64, int32, int64. y(Tensor): Tensor, data type is bool, float32, float64, int32, int64. name(str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: output Tensor, data type is bool, value is [False] or [True]. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 2, 3]) >>> z = paddle.to_tensor([1, 4, 3]) >>> result1 = paddle.equal_all(x, y) >>> print(result1) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, True) >>> result2 = paddle.equal_all(x, z) >>> print(result2) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, False) """ if in_dynamic_or_pir_mode(): return _C_ops.equal_all(x, y) else: helper = LayerHelper("equal_all", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') helper.append_op( type='equal_all', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @templatedoc() def allclose(x, y, rtol=1e-05, atol=1e-08, equal_nan=False, name=None): r""" Check if all :math:`x` and :math:`y` satisfy the condition: .. math:: \left| x - y \right| \leq atol + rtol \times \left| y \right| elementwise, for all elements of :math:`x` and :math:`y`. This is analogous to :math:`numpy.allclose`, namely that it returns :math:`True` if two tensors are elementwise equal within a tolerance. Args: x (Tensor): The input tensor, it's data type should be float16, float32, float64. y (Tensor): The input tensor, it's data type should be float16, float32, float64. rtol (rtoltype, optional): The relative tolerance. Default: :math:`1e-5` . atol (atoltype, optional): The absolute tolerance. Default: :math:`1e-8` . equal_nan (equalnantype, optional): ${equal_nan_comment}. Default: False. name (str, optional): Name for the operation. For more information, please refer to :ref:`api_guide_Name`. Default: None. Returns: Tensor: The output tensor, it's data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([10000., 1e-07]) >>> y = paddle.to_tensor([10000.1, 1e-08]) >>> result1 = paddle.allclose(x, y, rtol=1e-05, atol=1e-08, equal_nan=False, name="ignore_nan") >>> print(result1) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, False) >>> result2 = paddle.allclose(x, y, rtol=1e-05, atol=1e-08, equal_nan=True, name="equal_nan") >>> print(result2) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, False) >>> x = paddle.to_tensor([1.0, float('nan')]) >>> y = paddle.to_tensor([1.0, float('nan')]) >>> result1 = paddle.allclose(x, y, rtol=1e-05, atol=1e-08, equal_nan=False, name="ignore_nan") >>> print(result1) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, False) >>> result2 = paddle.allclose(x, y, rtol=1e-05, atol=1e-08, equal_nan=True, name="equal_nan") >>> print(result2) Tensor(shape=[], dtype=bool, place=Place(cpu), stop_gradient=True, True) """ if in_dynamic_or_pir_mode(): return _C_ops.allclose(x, y, rtol, atol, equal_nan) else: check_variable_and_dtype( x, "input", ['float16', 'float32', 'float64'], 'allclose' ) check_variable_and_dtype( y, "input", ['float16', 'float32', 'float64'], 'allclose' ) check_type(rtol, 'rtol', float, 'allclose') check_type(atol, 'atol', float, 'allclose') check_type(equal_nan, 'equal_nan', bool, 'allclose') helper = LayerHelper("allclose", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') inputs = {'Input': x, 'Other': y} outputs = {'Out': out} attrs = {'rtol': str(rtol), 'atol': str(atol), 'equal_nan': equal_nan} helper.append_op( type='allclose', inputs=inputs, outputs=outputs, attrs=attrs ) return out @templatedoc() def equal(x, y, name=None): """ This layer returns the truth value of :math:`x == y` elementwise. Note: The output has no gradient. Args: x (Tensor): Tensor, data type is bool, float16, float32, float64, uint8, int8, int16, int32, int64. y (Tensor): Tensor, data type is bool, float16, float32, float64, uint8, int8, int16, int32, int64. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: output Tensor, it's shape is the same as the input's Tensor, and the data type is bool. The result of this op is stop_gradient. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 3, 2]) >>> result1 = paddle.equal(x, y) >>> print(result1) Tensor(shape=[3], dtype=bool, place=Place(cpu), stop_gradient=True, [True , False, False]) """ if not isinstance(y, (int, bool, float, Variable, paddle.pir.OpResult)): raise TypeError( f"Type of input args must be float, bool, int or Tensor, but received type {type(y)}" ) if not isinstance(y, (Variable, paddle.pir.OpResult)): y = full(shape=[], dtype=x.dtype, fill_value=y) if in_dynamic_or_pir_mode(): return _C_ops.equal(x, y) else: check_variable_and_dtype( x, "x", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "equal", ) check_variable_and_dtype( y, "y", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "equal", ) helper = LayerHelper("equal", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') out.stop_gradient = True helper.append_op( type='equal', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @inplace_apis_in_dygraph_only def equal_(x, y, name=None): r""" Inplace version of ``equal`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_equal`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_or_pir_mode(): return _C_ops.equal_(x, y) @templatedoc() def greater_equal(x, y, name=None): """ Returns the truth value of :math:`x >= y` elementwise, which is equivalent function to the overloaded operator `>=`. Note: The output has no gradient. Args: x (Tensor): First input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. y (Tensor): Second input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: The output shape is same as input :attr:`x`. The output data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 3, 2]) >>> result1 = paddle.greater_equal(x, y) >>> print(result1) Tensor(shape=[3], dtype=bool, place=Place(cpu), stop_gradient=True, [True , False, True ]) """ if in_dynamic_or_pir_mode(): return _C_ops.greater_equal(x, y) else: check_variable_and_dtype( x, "x", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "greater_equal", ) check_variable_and_dtype( y, "y", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "greater_equal", ) helper = LayerHelper("greater_equal", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') out.stop_gradient = True helper.append_op( type='greater_equal', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @inplace_apis_in_dygraph_only def greater_equal_(x, y, name=None): r""" Inplace version of ``greater_equal`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_greater_equal`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.greater_equal_(x, y) @templatedoc() def greater_than(x, y, name=None): """ Returns the truth value of :math:`x > y` elementwise, which is equivalent function to the overloaded operator `>`. Note: The output has no gradient. Args: x (Tensor): First input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. y (Tensor): Second input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: The output shape is same as input :attr:`x`. The output data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 3, 2]) >>> result1 = paddle.greater_than(x, y) >>> print(result1) Tensor(shape=[3], dtype=bool, place=Place(cpu), stop_gradient=True, [False, False, True ]) """ if in_dynamic_or_pir_mode(): return _C_ops.greater_than(x, y) else: check_variable_and_dtype( x, "x", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "greater_than", ) check_variable_and_dtype( y, "y", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "greater_than", ) helper = LayerHelper("greater_than", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') out.stop_gradient = True helper.append_op( type='greater_than', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @inplace_apis_in_dygraph_only def greater_than_(x, y, name=None): r""" Inplace version of ``greater_than`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_greater_than`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.greater_than_(x, y) @templatedoc() def less_equal(x, y, name=None): """ Returns the truth value of :math:`x <= y` elementwise, which is equivalent function to the overloaded operator `<=`. Note: The output has no gradient. Args: x (Tensor): First input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. y (Tensor): Second input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: The output shape is same as input :attr:`x`. The output data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 3, 2]) >>> result1 = paddle.less_equal(x, y) >>> print(result1) Tensor(shape=[3], dtype=bool, place=Place(cpu), stop_gradient=True, [True , True , False]) """ if in_dynamic_or_pir_mode(): return _C_ops.less_equal(x, y) else: check_variable_and_dtype( x, "x", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "less_equal", ) check_variable_and_dtype( y, "y", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "less_equal", ) helper = LayerHelper("less_equal", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') out.stop_gradient = True helper.append_op( type='less_equal', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @inplace_apis_in_dygraph_only def less_equal_(x, y, name=None): r""" Inplace version of ``less_equal`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_less_equal`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.less_equal_(x, y) @templatedoc() def less_than(x, y, name=None): """ Returns the truth value of :math:`x < y` elementwise, which is equivalent function to the overloaded operator `<`. Note: The output has no gradient. Args: x (Tensor): First input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. y (Tensor): Second input to compare which is N-D tensor. The input data type should be bool, float16, float32, float64, uint8, int8, int16, int32, int64. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: The output shape is same as input :attr:`x`. The output data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 3, 2]) >>> result1 = paddle.less_than(x, y) >>> print(result1) Tensor(shape=[3], dtype=bool, place=Place(cpu), stop_gradient=True, [False, True , False]) """ if in_dynamic_or_pir_mode(): return _C_ops.less_than(x, y) else: check_variable_and_dtype( x, "x", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "less_than", ) check_variable_and_dtype( y, "y", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "less_than", ) helper = LayerHelper("less_than", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') out.stop_gradient = True helper.append_op( type='less_than', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @inplace_apis_in_dygraph_only def less_than_(x, y, name=None): r""" Inplace version of ``less_than`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_less_than`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.less_than_(x, y) @templatedoc() def not_equal(x, y, name=None): """ Returns the truth value of :math:`x != y` elementwise, which is equivalent function to the overloaded operator `!=`. Note: The output has no gradient. Args: x (Tensor): First input to compare which is N-D tensor. The input data type should be bool, float32, float64, uint8, int8, int16, int32, int64. y (Tensor): Second input to compare which is N-D tensor. The input data type should be bool, float32, float64, uint8, int8, int16, int32, int64. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: The output shape is same as input :attr:`x`. The output data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([1, 2, 3]) >>> y = paddle.to_tensor([1, 3, 2]) >>> result1 = paddle.not_equal(x, y) >>> print(result1) Tensor(shape=[3], dtype=bool, place=Place(cpu), stop_gradient=True, [False, True , True ]) """ if in_dynamic_or_pir_mode(): return _C_ops.not_equal(x, y) else: check_variable_and_dtype( x, "x", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "not_equal", ) check_variable_and_dtype( y, "y", [ "bool", "float16", "float32", "float64", "uint8", "int8", "int16", "int32", "int64", "uint16", ], "not_equal", ) helper = LayerHelper("not_equal", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') out.stop_gradient = True helper.append_op( type='not_equal', inputs={'X': [x], 'Y': [y]}, outputs={'Out': [out]}, ) return out @inplace_apis_in_dygraph_only def not_equal_(x, y, name=None): r""" Inplace version of ``not_equal`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_not_equal`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.not_equal_(x, y) def is_tensor(x): """ Tests whether input object is a paddle.Tensor. Args: x (object): Object to test. Returns: A boolean value. True if ``x`` is a paddle.Tensor, otherwise False. Examples: .. code-block:: python >>> import paddle >>> input1 = paddle.rand(shape=[2, 3, 5], dtype='float32') >>> check = paddle.is_tensor(input1) >>> print(check) True >>> input3 = [1, 4] >>> check = paddle.is_tensor(input3) >>> print(check) False """ if in_dynamic_or_pir_mode(): return isinstance( x, (Tensor, paddle.base.core.eager.Tensor, paddle.pir.Value) ) else: return isinstance(x, Variable) def _bitwise_op(op_name, x, y, out=None, name=None, binary_op=True): if in_dynamic_mode(): op = getattr(_C_ops, op_name) if binary_op: return op(x, y) else: return op(x) else: check_variable_and_dtype( x, "x", ["bool", "uint8", "int8", "int16", "int32", "int64"], op_name, ) if y is not None: check_variable_and_dtype( y, "y", ["bool", "uint8", "int8", "int16", "int32", "int64"], op_name, ) if out is not None: check_type(out, "out", Variable, op_name) helper = LayerHelper(op_name, **locals()) if binary_op: assert x.dtype == y.dtype if out is None: out = helper.create_variable_for_type_inference(dtype=x.dtype) if binary_op: helper.append_op( type=op_name, inputs={"X": x, "Y": y}, outputs={"Out": out} ) else: helper.append_op( type=op_name, inputs={"X": x}, outputs={"Out": out} ) return out def bitwise_and(x, y, out=None, name=None): r""" Apply ``bitwise_and`` on Tensor ``X`` and ``Y`` . .. math:: Out = X \& Y Note: ``paddle.bitwise_and`` supports broadcasting. If you want know more about broadcasting, please refer to please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): Input Tensor of ``bitwise_and`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. y (Tensor): Input Tensor of ``bitwise_and`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. out (Tensor, optional): Result of ``bitwise_and`` . It is a N-D Tensor with the same data type of input Tensor. Default: None. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: Result of ``bitwise_and`` . It is a N-D Tensor with the same data type of input Tensor. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([-5, -1, 1]) >>> y = paddle.to_tensor([4, 2, -3]) >>> res = paddle.bitwise_and(x, y) >>> print(res) Tensor(shape=[3], dtype=int64, place=Place(cpu), stop_gradient=True, [0, 2, 1]) """ if in_dynamic_or_pir_mode() and out is None: return _C_ops.bitwise_and(x, y) return _bitwise_op( op_name="bitwise_and", x=x, y=y, name=name, out=out, binary_op=True ) @inplace_apis_in_dygraph_only def bitwise_and_(x, y, name=None): r""" Inplace version of ``bitwise_and`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_bitwise_and`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_or_pir_mode(): return _C_ops.bitwise_and_(x, y) def bitwise_or(x, y, out=None, name=None): r""" Apply ``bitwise_or`` on Tensor ``X`` and ``Y`` . .. math:: Out = X | Y Note: ``paddle.bitwise_or`` supports broadcasting. If you want know more about broadcasting, please refer to please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): Input Tensor of ``bitwise_or`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. y (Tensor): Input Tensor of ``bitwise_or`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. out (Tensor, optional): Result of ``bitwise_or`` . It is a N-D Tensor with the same data type of input Tensor. Default: None. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: Result of ``bitwise_or`` . It is a N-D Tensor with the same data type of input Tensor. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([-5, -1, 1]) >>> y = paddle.to_tensor([4, 2, -3]) >>> res = paddle.bitwise_or(x, y) >>> print(res) Tensor(shape=[3], dtype=int64, place=Place(cpu), stop_gradient=True, [-1, -1, -3]) """ if in_dynamic_or_pir_mode() and out is None: return _C_ops.bitwise_or(x, y) return _bitwise_op( op_name="bitwise_or", x=x, y=y, name=name, out=out, binary_op=True ) @inplace_apis_in_dygraph_only def bitwise_or_(x, y, name=None): r""" Inplace version of ``bitwise_or`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_bitwise_or`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.bitwise_or_(x, y) def bitwise_xor(x, y, out=None, name=None): r""" Apply ``bitwise_xor`` on Tensor ``X`` and ``Y`` . .. math:: Out = X ^\wedge Y Note: ``paddle.bitwise_xor`` supports broadcasting. If you want know more about broadcasting, please refer to please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): Input Tensor of ``bitwise_xor`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. y (Tensor): Input Tensor of ``bitwise_xor`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. out (Tensor, optional): Result of ``bitwise_xor`` . It is a N-D Tensor with the same data type of input Tensor. Default: None. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: Result of ``bitwise_xor`` . It is a N-D Tensor with the same data type of input Tensor. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([-5, -1, 1]) >>> y = paddle.to_tensor([4, 2, -3]) >>> res = paddle.bitwise_xor(x, y) >>> print(res) Tensor(shape=[3], dtype=int64, place=Place(cpu), stop_gradient=True, [-1, -3, -4]) """ if in_dynamic_or_pir_mode() and out is None: return _C_ops.bitwise_xor(x, y) return _bitwise_op( op_name="bitwise_xor", x=x, y=y, name=name, out=out, binary_op=True ) @inplace_apis_in_dygraph_only def bitwise_xor_(x, y, name=None): r""" Inplace version of ``bitwise_xor`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_bitwise_xor`. """ out_shape = broadcast_shape(x.shape, y.shape) if out_shape != x.shape: raise ValueError( "The shape of broadcast output {} is different from that of inplace tensor {} in the Inplace operation.".format( out_shape, x.shape ) ) if in_dynamic_mode(): return _C_ops.bitwise_xor_(x, y) def bitwise_not(x, out=None, name=None): r""" Apply ``bitwise_not`` on Tensor ``X``. .. math:: Out = \sim X Note: ``paddle.bitwise_not`` supports broadcasting. If you want know more about broadcasting, please refer to please refer to `Introduction to Tensor`_ . .. _Introduction to Tensor: ../../guides/beginner/tensor_en.html#chapter5-broadcasting-of-tensor Args: x (Tensor): Input Tensor of ``bitwise_not`` . It is a N-D Tensor of bool, uint8, int8, int16, int32, int64. out (Tensor, optional): Result of ``bitwise_not`` . It is a N-D Tensor with the same data type of input Tensor. Default: None. name (str, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Returns: Tensor: Result of ``bitwise_not`` . It is a N-D Tensor with the same data type of input Tensor. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([-5, -1, 1]) >>> res = paddle.bitwise_not(x) >>> print(res) Tensor(shape=[3], dtype=int64, place=Place(cpu), stop_gradient=True, [ 4, 0, -2]) """ if in_dynamic_or_pir_mode() and out is None: return _C_ops.bitwise_not(x) return _bitwise_op( op_name="bitwise_not", x=x, y=None, name=name, out=out, binary_op=False ) @inplace_apis_in_dygraph_only def bitwise_not_(x, name=None): r""" Inplace version of ``bitwise_not`` API, the output Tensor will be inplaced with input ``x``. Please refer to :ref:`api_paddle_bitwise_not`. """ if in_dynamic_mode(): return _C_ops.bitwise_not_(x) @templatedoc() def isclose(x, y, rtol=1e-05, atol=1e-08, equal_nan=False, name=None): r""" Check if all :math:`x` and :math:`y` satisfy the condition: .. math:: \left| x - y \right| \leq atol + rtol \times \left| y \right| elementwise, for all elements of :math:`x` and :math:`y`. The behaviour of this operator is analogous to :math:`numpy.isclose`, namely that it returns :math:`True` if two tensors are elementwise equal within a tolerance. Args: x(Tensor): The input tensor, it's data type should be float16, float32, float64, complex64, complex128. y(Tensor): The input tensor, it's data type should be float16, float32, float64, complex64, complex128. rtol(rtoltype, optional): The relative tolerance. Default: :math:`1e-5` . atol(atoltype, optional): The absolute tolerance. Default: :math:`1e-8` . equal_nan(equalnantype, optional): If :math:`True` , then two :math:`NaNs` will be compared as equal. Default: :math:`False` . name (str, optional): Name for the operation. For more information, please refer to :ref:`api_guide_Name`. Default: None. Returns: Tensor: The output tensor, it's data type is bool. Examples: .. code-block:: python >>> import paddle >>> x = paddle.to_tensor([10000., 1e-07]) >>> y = paddle.to_tensor([10000.1, 1e-08]) >>> result1 = paddle.isclose(x, y, rtol=1e-05, atol=1e-08, ... equal_nan=False, name="ignore_nan") >>> print(result1) Tensor(shape=[2], dtype=bool, place=Place(cpu), stop_gradient=True, [True , False]) >>> result2 = paddle.isclose(x, y, rtol=1e-05, atol=1e-08, ... equal_nan=True, name="equal_nan") >>> print(result2) Tensor(shape=[2], dtype=bool, place=Place(cpu), stop_gradient=True, [True , False]) >>> x = paddle.to_tensor([1.0, float('nan')]) >>> y = paddle.to_tensor([1.0, float('nan')]) >>> result1 = paddle.isclose(x, y, rtol=1e-05, atol=1e-08, ... equal_nan=False, name="ignore_nan") >>> print(result1) Tensor(shape=[2], dtype=bool, place=Place(cpu), stop_gradient=True, [True , False]) >>> result2 = paddle.isclose(x, y, rtol=1e-05, atol=1e-08, ... equal_nan=True, name="equal_nan") >>> print(result2) Tensor(shape=[2], dtype=bool, place=Place(cpu), stop_gradient=True, [True, True]) """ if in_dynamic_or_pir_mode(): return _C_ops.isclose(x, y, rtol, atol, equal_nan) else: check_variable_and_dtype( x, "input", ['float16', 'float32', 'float64', 'complex64', 'complex128'], 'isclose', ) check_variable_and_dtype( y, "input", ['float16', 'float32', 'float64', 'complex64', 'complex128'], 'isclose', ) check_type(rtol, 'rtol', float, 'isclose') check_type(atol, 'atol', float, 'isclose') check_type(equal_nan, 'equal_nan', bool, 'isclose') helper = LayerHelper("isclose", **locals()) out = helper.create_variable_for_type_inference(dtype='bool') inputs = {'Input': x, 'Other': y} outputs = {'Out': out} attrs = {'rtol': str(rtol), 'atol': str(atol), 'equal_nan': equal_nan} helper.append_op( type='isclose', inputs=inputs, outputs=outputs, attrs=attrs ) return out